Display SP Hard Oled by iPhone 13 A2482 A2631 A2633 A2634 A2635 with black touch screen

The SP Hard OLED screen for Apple iPhone 13, models A2482, A2631, A2633, A2634 and A2635, is a black compatible replacement part that integrates a rigid OLED panel and a touch digitizer. It is designed to replace screens with broken glass, no image, display defects or touch response failures. Its self-emissive pixel technology provides deep blacks and high contrast without requiring LCD backlighting. It is an alternative for technical services and refurbishment workshops that need to replace the iPhone 13 screen while maintaining OLED display technology.

- Compatible brand:Apple.

- Model:iPhone 13.

- Compatible technical models:A2482, A2631, A2633, A2634 and A2635.

- Screen technology:Hard OLED (rigid OLED).

- Size:6.1 inches.

- Panel structure:OLED with rigid substrate.

- Touch digitizer:integrated into the screen module.

- Color:black.

- Display:self-emissive pixels with deep blacks and high contrast.

- Function:image reproduction and touch response.

- Component type:replacement OLED screen with touch digitizer.

- Quality:compatible SP Hard OLED.

The SP Hard OLED screen allows the iPhone 13 display module to be replaced using a component that integrates the OLED panel and touch digitizer, facilitating repair operations. Its self-emissive pixel technology provides deep blacks, high contrast and image reproduction with the characteristics of OLED panels. The rigid construction offers a lower-cost alternative to Soft OLED screens while maintaining display technology with superior contrast compared to conventional LCD solutions. Its black front finish is designed to integrate into the device, and its compatibility covers the five identified technical variants. It is an option for workshops seeking to balance image quality, touch functionality and replacement cost in repairs and refurbishment operations.

- Switch off the iPhone 13 and disconnect the battery before handling the screen connectors, using ESD antistatic protection.

- Carefully remove the damaged screen and disconnect its flex cables using appropriate tools.

- Carefully transfer the upper sensor assembly from the previous screen when applicable, preserving the components linked to the Face ID system.

- Align the SP Hard OLED screen connectors without applying excessive pressure or bending the flex cables.

- Temporarily connect the module and check the image, brightness, colors and touch response across the entire surface.

- Verify the operation of the proximity sensor and Face ID system after installing the upper components.

- Clean any adhesive residue from the housing and apply suitable new perimeter adhesive.

- Close the screen by applying uniform pressure around the perimeter to ensure proper attachment.