DJI Phantom 4 Pro spare parts

DJI Phantom 4 Pro Repuestos Specifications

In the following list, we will cover the main components or parts (repuestos) for the DJI Phantom 4 Pro drone.

• Battery: High Capacity Intelligent Flight Battery, 5870mAh 15.2V 4S LiPo.
• Propellers: Quick release folding propellers, 9450S.
• Camera: 1-inch 20MP Exmor R CMOS sensor with mechanical shutter and adjustable aperture.
• Gimbal: Three-axis (pitch, roll, yaw) stabilised gimbal.
• Obstacle Sensors: Forward, backward and downward vision systems.
• Remote Controller: Operating Frequency 2.400 - 2.483 GHz and 5.725 - 5.850 GHz.

Replacing DJI Phantom 4 Pro Repuestos

Below are step-by-step instructions on how to replace major parts of the DJI Phantom 4 Pro.

Replace DJI Phantom 4 Pro Battery

• Step 1: Power off your Phantom 4 Pro. Gently unfasten the battery buckle, and pull the battery out of the battery compartment.
• Step 2: To install the new battery, align the battery with the battery compartment and push it in until you hear a click.

Replace Phantom 4 Pro Propellers

• Step 1: Unscrew the old propellers by holding the motor firmly and twisting each propeller opposite to the direction of the motor spin.
• Step 2: To install new propellers, match the color on the propeller with the color on the motor arm. Attach the propeller and twist to lock it in place.

Replace Phantom 4 Pro Gimbal

• Step 1: Remove the protective cover of the drone’s gimbal. Unfasten the cable that connects the gimbal to the drone.
• Step 2: Unscrew the four screws that connect the gimbal to the drone and remove the old gimbal.
• Step 3: Attach the new gimbal by screwing in the four screws. Plug the cable back in to connect the gimbal to the drone. Lastly, replace the protective cover.