Front housing adhesive by iPhone 16E A3212 A3409 A3410 A3408

Front housing adhesive for iPhone 16E A3212 A3409 A3410 A3408

Front housing adhesive for Apple iPhone 16e A3212, A3408, A3409 and A3410, also compatible with Apple iPhone 17e A3575, A3634 and A3635. Replacement designed to restore the correct attachment and sealing between the front assembly and the chassis after a repair or opening of the device. Its specific cut facilitates precise placement around the perimeter of the device and allows the adhesive used during disassembly to be replaced. Designed for professional installation and to maintain an even bond before permanently closing the device.

Specifications

Perimeter adhesive for the front housing.

Compatible with iPhone 16e A3212, A3408, A3409 and A3410.

Compatible with iPhone 17e A3575, A3634 and A3635.

Designed to replace the adhesive removed when opening the device.

Cut adapted to the perimeter of the front assembly.

Allows an even attachment between the screen and chassis.

This replacement facilitates assembly after repairs that require separating the front assembly from the housing. Correct replacement of the adhesive helps maintain even pressure around the perimeter and reduces the possibility of gaps after closing. It is designed for professional screen, battery, camera, connector or other internal component repairs that require opening the device beforehand. To achieve proper adhesion, it is essential to completely remove the remains of the previous adhesive and correctly clean the surfaces before installation.

Installation tips

Disconnect the battery before carrying out any internal repair.

Completely remove the remains of the previous adhesive.

Clean the perimeter of the chassis with isopropyl alcohol and allow it to dry.

Check the orientation of the adhesive before removing all protective films.

Carefully align each section without stretching the material.

Perform all functionality tests before permanently closing the device.

Apply even pressure around the perimeter after installation to promote adhesion.

Technical table