Macro back camera lens by Oppo Reno 13 F 5G Oppo Reno 13 FS 5G Oppo Reno 13A 621036000455 Service Pack

The rear macro camera glass for Oppo Reno13 F 5G, Reno13 FS 5G and Reno13 A, identified by technical model CPH2699, is a Service Pack replacement part with part number 621036000455. This component provides external protection for the opening corresponding to the macro camera and allows the glass to be replaced when it shows cracks, scratches, breakage or detachment. Replacing it helps restore physical coverage of the optical area and preserve the appearance of the camera assembly. It is intended for targeted repairs where the internal camera module remains fully functional.

- Brand: Oppo.

- Compatible models: Oppo Reno13 F 5G, Oppo Reno13 FS 5G and Oppo Reno13 A.

- Technical model: CPH2699.

- Component: External rear macro camera protective glass.

- Quality: Service Pack.

- Part Number (Part No): 621036000455.

- Material: Glass.

- Part type: External optical protector for the macro camera.

- Location: Macro camera opening on the rear of the device.

- Function: External protection of the macro camera optical area against direct contact with external elements.

- Compatible variants: Internationally marketed Oppo Reno13 F 5G and Reno13 FS 5G, and Japanese-market Oppo Reno13 A, corresponding to technical model CPH2699.

- Application: Replacement of deteriorated, cracked, scratched or broken macro camera protective glass.

The Service Pack replacement part 621036000455 allows only the macro camera protective glass to be replaced without replacing the camera module if it remains functional. Precise identification of the component makes it easier to distinguish it from the glass intended for the main and ultra-wide cameras of the same device.

Its compatibility with the Reno13 F 5G, Reno13 FS 5G and Reno13 A commercial names, all associated with technical code CPH2699, simplifies component selection in workshops handling different commercial variants.

The repair restores protection of the camera opening and removes surface damage from the glass that may affect image capture, while preserving internal components that do not require repair.

- Turn off the device, disconnect the battery before working inside the device and use ESD protection.

- Carefully remove the damaged glass using appropriate tools to protect the camera and housing.

- Remove glass fragments and adhesive residue from the mounting area before installing the new replacement part.

- Carefully clean the optical surface and check that no particles, residue or fragments remain on the lens.

- Position the new glass according to its orientation and align it correctly with the macro camera opening.

- Use suitable fixing adhesive when required, preventing contact with the optical surface.

- Apply uniform pressure to the fixing area and follow the setting conditions of the adhesive used.

- Check that the glass is correctly seated and that there are no gaps around its edges.

- Perform close-up photography tests and verify image sharpness and the absence of unusual spots or reflections before completing the repair.