Middle cover gold by Honor X7D

Gold central housing or middle frame for Honor X7d

Gold central housing or middle frame for Honor X7d, designed to replace the intermediate structure of the device when the original chassis has impacts, deformation, breakage, worn anchors or fitting problems after a previous repair. This component acts as the mounting base for the screen, mainboard, battery, side buttons, cameras, speakers, internal flex cables and back cover, so it is a key part to recover the rigidity of the device and ensure stable assembly. Compatible with Honor X7d 4G and Honor X7d 5G, including technical models LGN-LX1, LGN-LX2, LGN-LX3 and LGN-NX1. Its gold finish allows the device aesthetics to be maintained and the alignment of the set to be restored in professional repairs.

Key features

• Central housing or middle frame in gold color.

• Compatible with Honor X7d 4G and Honor X7d 5G.

• Compatible technical models: LGN-LX1, LGN-LX2, LGN-LX3 and LGN-NX1.

• Intermediate structural part of the device.

• Suitable for bent, broken, deformed chassis or chassis with damaged anchors.

• Allows the screen, mainboard, battery, buttons, cameras and internal modules to be correctly repositioned.

• Does not include screen, back cover, battery or internal electronic components.

• Replacement prepared for professional installation.

This central housing or middle frame allows the structural solidity of the Honor X7d to be recovered and improves the fit of the components after a fall, torsion or previous disassembly. It is especially useful when the original frame prevents the device from closing correctly, creates irregular pressure on the screen, leaves visible gaps or does not allow the internal modules to be securely fixed. Its installation helps improve front alignment, stabilize anchor points and enable a cleaner assembly. Before closing the device, it is advisable to check the condition of flex cables, screws, adhesives, side buttons and connectors to avoid tension, poor contacts or closing problems. Available for immediate shipping from Spain.

Installation tips

1. Disconnect the battery before starting disassembly.
2. Use ESD protection throughout the repair.
3. Transfer the internal components carefully and respect the original position of each screw.
4. Check that the screen, mainboard, battery and flex cables fit without pressure.
5. Replace damaged adhesives and clean old glue residue.
6. Verify side buttons, cameras, speakers, vibration and connectors before closing.
7. Apply even pressure when installing the back cover to ensure proper seating.

Technical table