Alcatel A3 XL

Technical Characteristics of Alcatel A3 XL

The Alcatel A3 XL is a competent smartphone launched by Alcatel. It comes with a number of notable characteristics that make it worthy of consideration for users. Below you will find the detailed specifications.

Display

It has a 6.0 inch IPS display with a resolution of 720x1280 pixels, providing a substantial viewing experience.

Processor

The A3 XL is powered by a 1.1 GHz Quad-core MediaTek MT8735B processor ensuring smooth and proficient performance.

Memory

The device houses an 8 GB internal storage, expandable up to 32 GB via microSD, along with 1 GB of RAM.

Camera

There's a 8MP rear camera and a 5MP front camera, both equipped with LED flash for improved low light photos.

Battery

The Alcatel A3 XL operates on a 3000 mAh non-removable battery, offering extended usage time.

Instructions on How to Replace Alcatel A3 XL

Replacing screen parts of the Alcatel A3 XL requires careful attention and patience. Below are the listed steps to successfully carry out this process.

Tools Needed

• Small Phillips Screwdriver
• Plastic Opening Tools
• Heat Gun or Hair Dryer

Procedure

Step 1: Power Off the Device

Ensure that your Alcatel A3 XL smartphone is fully powered off before beginning.

Step 2: Remove the Back Cover and Battery

With the use of a plastic opening tool, firmly pry off the back cover of the device. Then, remove the battery.

Step 3: Remove the Screws

Using a Phillips Screwdriver, unscrew the 18 screws that are attaching the screen to the phone body.

Step 4: Remove the Screen

Use a Heat Gun or Hair Dryer to gently warm the edges of the display. This will loosen the adhesive making the screen easier to remove. Using plastic opening tools, carefully pry the display assembly away from the phone body.

Step 5: Place the New Screen

Once the old screen is completely detached, clean any remaining adhesive from the phone body. Apply new adhesive and align the new screen. Press it into place ensuring it is secure.

Step 6: Reassemble the Phone

Replace the screws and put the battery and the back cover back in place. Once fully reassembled, power on the device to confirm the replacement was successful.