Alcatel One Touch Pop C5 repuestos

Technical Characteristics of Alcatel One Touch Pop C5 Repuestos

The Alcatel One Touch Pop C5 is a smartphone designed and manufactured by Alcatel. This device utilises a range of components, also known as 'repuestos' in Spanish, to provide its functionality. The main technical characteristics of these components are listed below:

• Screen: The device has a 4.5-inch TFT capacitive touchscreen, with a resolution of 480 x 854 pixels.
• Processor: The phone is powered by a 1.3 GHz Quad-core MediaTek MT6582 processor.
• Memory: The phone has a 512MB RAM and 4GB internal storage capacity, expandable up to 32GB using a microSD card.
• Camera: The Alcatel One Touch Pop C5 features a 5 MP rear camera and a 0.3 MP front camera.
• Battery: The device uses a removable Li-Ion 1800 mAh battery.

Instructions for Replacing Alcatel One Touch Pop C5 Repuestos

Replacing components on the Alcatel One Touch Pop C5 needs to be done with caution. Consider these detailed steps:

Screen Replacement

• Switch off the phone and remove the battery.
• With a small screwdriver, remove the screws at the back of the device.
• Use a plastic pry tool to carefully separate the back cover from the screen assembly.
• Disconnect the display ribbon cable from the motherboard. Remove the broken screen assembly.
• Install the new display assembly and reconnect the cable.
• Reassemble the device by following the disassembly steps in reverse order.

Battery Replacement

• Power off the phone.
• Remove the back cover of the phone to expose the battery.
• Disconnect the battery connector and lift the battery out of the device.
• Place the new battery in the battery compartment and connect the battery connector.
• Replace the back cover.