Archos 60 spare parts

    There are 2 products.

    Technical Characteristics of Archos 60 Repuestos

    The Archos 60 Repuestos is designed with the focus on durability and functionality. Here are the critical technical characteristics:

    • Screen Size: 6.0 Inches
    • Camera: Rear: 12.0 MP; Front: 2.0 MP
    • Battery: 4000mAh, Non-Removable
    • Operating System: Android
    • RAM: 2GB
    • Stora...

    Technical Characteristics of Archos 60 Repuestos

    The Archos 60 Repuestos is designed with the focus on durability and functionality. Here are the critical technical characteristics:

    • Screen Size: 6.0 Inches
    • Camera: Rear: 12.0 MP; Front: 2.0 MP
    • Battery: 4000mAh, Non-Removable
    • Operating System: Android
    • RAM: 2GB
    • Storage: 16GB

    Step-by-step instructions to replace Archos 60 Repuestos

    Before you start, ensure you have a suitable replacement for the broken/damaged part along with the necessary tools – small Phillips-head screwdriver, tweezers, and a pry tool.

    Also, please note that opening your device can void the manufacturer's warranty and can cause further damage if not done carefully. Always proceed with caution.

    • Step 1: Turn off your Device

      Turn off your device and unplug it from any power sources. It’s crucial to avoid any electric current flow during the repair process.

    • Step 2: Remove the Back Cover

      Use a thin pry tool to gently loosen the clips holding the back cover to your device. Start from one corner and work your way around the device.

    • Step 3: Disconnect the Battery

      Locate the battery connector and disengage it. Do this by gently lifting the connector with a pry tool. This disconnects the battery from the device.

    • Step 4: Replace the Component

      Now, identify the component that needs to be replaced. Whether it’s camera, screen, or any other part, remove the screws securing it, disconnect the connector cables, then remove the component.

    • Step 5: Install the New Part

      Install the new part by reversing the process of step 4. Attach the connector cables and fasten the part in place with the appropriate screws.

    • Step 6: Reconnect the Battery and Replace Cover

      Reconnect the battery and snap the back cover back in place. Ensure it fits snugly without gaps.

    • Step 7: Power on the Device

      Power on your device and check if everything's working as expected. If not, repeat the process or seek help from a professional.

    Less
    More
    Showing 1 - 2 of 2 items