ASUS Fonepad Note FHD 6 ME560CG spare parts

ASUS Fonepad Note FHD 6 ME560CG Repuestos Technical Specifications

The ASUS Fonepad Note FHD 6 ME560CG is an integral model in the line of ASUS devices and its spare parts can enhance its functionalities when you implement correct installation procedures. These repuestos – or spare parts – are designed to maintain the optimal performance of your device.

• Screen Type: Super IPS+ LCD, 16M colors.
• Screen Size: 6.0 inches, 99.2 cm2 (~70.7% screen-to-body ratio).
• Resolution: 1080 x 1920 pixels, 16:9 ratio (~367 ppi density).
• Operating System: Android 4.2 (Jelly Bean), upgradable to 5.0 (Lollipop).
• Processor: Dual-core 2.0 GHz.
• Battery: Non-removable Li-Po 3200 mAh battery.

Instructions for replacing ASUS Fonepad Note FHD 6 ME560CG Repuestos

Before undertaking any replacement procedure, ensure you have the proper tools and that the replacements are genuine ASUS Fonepad Note FHD 6 ME560CG repuestos. Always power off your device and remove any external connections such as sim cards or memory cards.

Screen Replacement

Replacing the screen is a meticulous process, as it requires careful handling of the components of the ASUS Fonepad Note FHD 6 ME560CG.

• Use a heat gun or blow dryer on low heat to loosen the glue holding the screen.
• Insert a plastic pry tool in between the screen and the frame and gently pry the screen loose.
• Remove cords connecting the screen.
• Apply adhesive to the frame and place the new screen onto the frame.
• Connect the cords to the screen.
• Finally, test the screen to assure that it’s working properly.

Battery Replacement

The battery is a key component in the ASUS Fonepad Note FHD 6 ME560CG, and these steps can assist you in proper replacement.

• Release the back cover of the device with the help of a plastic pry tool.
• Unscrew the screws that secure the battery.
• Disconnect the battery connector from the motherboard.
• Lift out the dead battery and replace it with the new one.
• Properly reconnect the battery connector to the motherboard.
• Secure the new battery with screws and replace the back cover of the device.
• Turn on your device to confirm the new battery is functioning correctly.