Asus Rog Phone 8 5G spare parts

    There are 20 products.

    Technical Characteristics of Asus Rog Phone 8 5G Repuestos

    The Asus Rog Phone 8 5G is a gaming-oriented high-end smartphone that boasts unparalleled performance and superior user experience. Below are some of the technical features:

    • Screen: AMOLED 6.78 inches, 2448 x 1080 pixels, 120Hz, HDR10+;
    • Processor: Qualcomm Snapdragon 888+;
    • RAM: Up to ...

    Technical Characteristics of Asus Rog Phone 8 5G Repuestos

    The Asus Rog Phone 8 5G is a gaming-oriented high-end smartphone that boasts unparalleled performance and superior user experience. Below are some of the technical features:

    • Screen: AMOLED 6.78 inches, 2448 x 1080 pixels, 120Hz, HDR10+;
    • Processor: Qualcomm Snapdragon 888+;
    • RAM: Up to 18GB LPDDR5;
    • Storage: Up to 512GB UFS 3.1;
    • Battery: 6000mAh with 65W HyperCharge;
    • Rear Cameras: 64MP main, 13MP ultra-wide, and 5MP macro;
    • Front Camera: 24MP;

    Instructions on How to Replace Asus Rog Phone 8 5G Repuestos

    Tools Needed:

    • Small Phillips Screwdriver
    • Spudger or Plastic Opening Tool
    • Tweezers
    • Heat Gun or Hair Dryer

    Procedure:

    Follow these steps to replace the internal components of your Asus Rog Phone 8 5G.

    • Before starting, make sure to turn off the device.
    • Use the heat gun or hairdryer to gently warm up the edges of the phone to loosen the adhesive binding the back cover.
    • Once warmed, use the spudger or plastic opening tool to carefully pry open the back cover. Start from one edge and slide the tool around the phone until the back cover is detached.
    • Remove the screws holding the protective metal plate over the motherboard using the screwdriver.
    • Then, remove the metal plate to expose the motherboard.
    • Disconnect the battery connector from the motherboard first to avoid any accidental power-ups.
    • Determine the part that needs to be replaced (be it the screen, the battery, the camera module, etc.).
    • Remove the necessary screws and connectors to replace the part. Here, a pair of tweezers can be handy to disconnect smaller connectors.
    • Once you have replaced the faulty part with the new one, reassemble the phone by following the steps in reverse order.

    Remember to proceed with caution to avoid any further damage to the device. If you feel the task is too complex, please contact a professional.

    Less
    More
    Showing 1 - 20 of 20 items