No products
Prices are tax included
The Asus Zenfone GO ZB551KL repuestos includes components such as the high-definition display, the PCB motherboard, and the efficient battery.
The Asus Zenfone GO ZB551KL repuestos includes components such as the high-definition display, the PCB motherboard, and the efficient battery.
Before starting the replacement procedure, ensure that the device is switched off and unplugged from any external power sources.
Use a premium plastic opening tool to gently pry open the back case of the Asus Zenfone GO ZB551KL from the small notch at the bottom of the phone.
Gently lift the battery connector upward to disconnect it from the motherboard. You can use a nylon spudger or a pair of precision tweezers for this task. Once the connector is disconnected, you can effortlessly lift up and remove the battery.
Locate and unscrew all the small Phillips screws securing the motherboard. Then, carefully lift the motherboard from the frame using a nylon spudger.
After successfully removing the old components, replace them with the new Asus Zenfone GO ZB551KL repuestos. Ensure each part is securely placed in its correct position and properly connected to the motherboard.
Start by re-screwing the motherboard and then reinsert the battery. Make sure to re-connect the battery connector to the motherboard. Finally, snap back the rear case onto the device until it clicks into place securely all the way around.
Please note that disassembling your smartphone can cause damage and void your warranty, so proceed at your own risk.
Less