Asus Zenfone Go ZB690KG spare parts

Asus Zenfone Go ZB690KG Technical Specifications

The Asus Zenfone Go ZB690KG is a superb low-budget smartphone with the following technical characteristics:

• Display: 6.9 inches, 600 x 1024 pixels
• CPU: Qualcomm MSM8212 Snapdragon 200
• RAM: 1GB
• Storage: 8GB built-in, microSD slot up to 64GB
• Camera: 5 MP, autofocus, LED flash
• Battery: Non-removable Li-Po 3480 mAh
• Operating System: Android 5.1 (Lollipop)

Replacing Asus Zenfone Go ZB690KG Parts

When replacing parts on the Asus Zenfone Go ZB690KG, follow these steps carefully:

Tools You Will Need

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers

Step 1: Power off the Device

Press and hold the power button to turn off the device. Disconnect it from any power source or peripherals.

Step 2: Remove the Back Cover

Using the plastic opening tool, carefully pry the back cover away from the device. Start from the bottom to make it easier.

Step 3: Remove Battery

Before proceeding, make sure you have turned off your device. Now, remove the battery. There is a small gap at the bottom right corner which will allow you to detach the battery from its connectors.

Step 4: Remove Screws from Device

Next, use your Phillips screwdriver to remove all visible screws from the device. Make sure to keep the screws in a safe place.

Step 5: Replace Needed Part

Now identify the part that you wish to replace (RAM, storage, camera, etc). Carefully remove the faulty component with the tweezers, and replace it with the new part.

Step 6: Reverse the Process

Once you have swapped out the faulty part, simply reverse the process. Replace the screws, reinsert the battery, and snap the back cover back onto the device.

Make sure to follow these instructions carefully to ensure your device isn't damaged during the repair process.