Asus Zenfone Max Pro M1 ZB601KL spare parts

Asus Zenfone Max Pro M1 ZB601KL Technical Characteristics

The Asus Zenfone Max Pro M1 ZB601KL is a smartphone designed by Asus, known for its high-performing hardware and affordable pricing. Here are some key technical characteristics of the Asus Zenfone Max Pro M1:

• Screen: 5.99 inches, 1080 x 2160 pixels, IPS LCD
• Processor: Qualcomm Snapdragon 636 Octa-core 1.8 GHz
• RAM: 3/4/6 GB
• Storage: 32/64 GB, expandable up to 2 TB
• Battery: Non-removable Li-Po 5000 mAh battery
• Operating System: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie)
• Camera: Dual rear camera (13 MP + 5 MP), Front camera 8 MP
• Connectivity: Wi-Fi, Bluetooth 5.0, GPS, FM radio, Micro USB 2.0

Instructions for Replacing Asus Zenfone Max Pro M1 ZB601KL Repuestos

Replacing components of a smartphone should be done with caution. Here are detailed steps on how to replace parts of Asus Zenfone Max Pro M1 ZB601KL:

Before You Start

Switch off your smartphone and disconnect it from any power source before you start. Make sure you have the correct repuesto (replacement parts) for your device.

Screen Replacement

Follow these steps to replace your screen:

• Start by removing the sim tray.
• Heat the edges of the screen to soften the adhesive.
• Use a suction cup and plastic tool to gently lift the screen from the frame.
• Disconnect the display connector and replace the screen.
• Reconnect the new screen and secure it with adhesive strips.

Battery Replacement

Here is how you can replace your battery:

• Remove the mid-frame cover after you have removed the screen.
• Unscrew and remove the protective metal plate.
• Disconnect the battery connector.
• Gently lever the battery out of its compartment.
• Place the new battery and connect to the motherboard.

Camera Replacement

To replace the camera follow these steps:

• Remove the protective plate over the motherboard.
• Disconnect the camera connector.
• Gently lever out the camera module.
• Place the new camera module and reconnect.

Please refer to a professional or service center if you're uncertain about any stage of the process.