Asus Zenfone Rog Phone ZS600KL spare parts

    There are 11 products.

    Technical Characteristics of Asus Zenfone Rog Phone ZS600KL Repuestos

    The Asus Zenfone Rog Phone ZS600KL is an advanced smartphone designed for high performance. If you are looking for spare parts, known as 'Repuestos' in Spanish, here are some of the key components you may need:

    • Display: 6.0" (15.24 cm) display with a resolution of 1080 x 21...

    Technical Characteristics of Asus Zenfone Rog Phone ZS600KL Repuestos

    The Asus Zenfone Rog Phone ZS600KL is an advanced smartphone designed for high performance. If you are looking for spare parts, known as 'Repuestos' in Spanish, here are some of the key components you may need:

    • Display: 6.0" (15.24 cm) display with a resolution of 1080 x 2160 pixels.
    • Processor: Qualcomm SDM845 Snapdragon 845 Octa-core.
    • Memory: RAM: 8GB, Internal Storage: 128/512GB.
    • Battery: A non-removable Li-Ion 4000 mAh battery.
    • Camera: Front Camera - 8 Megapixels; Rear Camera - 12 Megapixels + 8 Megapixels.

    Instructions for Replacing Asus Zenfone Rog Phone ZS600KL Repuestos

    Replacing parts on the Asus Zenfone Rog Phone ZS600KL requires careful attention. Please follow these instructions for the best results. Ensure that your device is powered off and unplugged before beginning any replacement process.

    Reapplying Screen:

    • Step 1: Use a heat gun to gently loosen the adhesive holding the screen to the phone body.
    • Step 2: Carefully pry the display free using a plastic tool to avoid scratching or damaging the device.
    • Step 3: Replace the old screen with the new one, ensuring it is properly aligned and that the connectors are securely in place.

    Replacing Battery:

    • Step 1: Remove the back cover of the device using a heat gun and accurate prying tool.
    • Step 2: Unplug the old battery from its connector carefully.
    • Step 3: Install the new battery and connect it, making sure it lays flat and is secure.
    • Step 4: Reattach the back cover ensuring all connectors are aligned properly.

    Replacing Camera:

    • Step 1: Remove the back cover of the phone using a heat gun and precision tools for prying.
    • Step 2: Locate the camera module and unscrew it from the phone's board.
    • Step 3: Connect the new camera module to the motherboard, ensuring secure connection.
    • Step 4: Reassemble the phone by screwing the camera in place and reattaching the cover.

    Please note, the instructions provided are a general guide, and we advise that any repairs should be undertaken by a qualified professional to avoid voiding any manufacturer warranties or causing further damage to the device.

    Less
    More
    Showing 1 - 11 of 11 items