Touch screen Azumi

Pantalla táctil Azumi: Technical Characteristics

The Pantalla táctil Azumi is a high-quality, responsive touchscreen for Azumi smartphones with the following specifications:

• Screen Size: Fits most Azumi models perfectly.
• Panel Type: TFT (Thin Film Transistor), providing high-quality images.
• Resolution: High-definition depending on the model of Azumi phone.
• Touchscreen Type: Capacitive, offering multi-touch capability.
• Colour Depth: Large colour range for vibrant display.

Instructions to Replace Pantalla táctil Azumi

Required Tools:

• Screwdrivers (Phillips and flathead).
• Suction cup.
• Plastic opening tools.
• Spudger.

Replacement Steps:

Step 1: Turn off Your Phone

Power off your Azumi smartphone to avoid any possible short circuits during the replacement process.

Step 2: Remove the Back Cover and Battery

Using the plastic opening tools, pry open the back cover carefully. Once the cover is removed, take out the battery.

Step 3: Unscrew the Phone

Use the appropriate screwdriver to take out the screws around the edges of the phone.

Step 4: Separate the Screen Assembly

Attach the suction cup to the screen and gently pull to separate the screen assembly from the body of the phone. Use the plastic opening tools and spudger to assist in the separation if needed.

Step 5: Disconnect and Remove the Damaged Screen

Locate and carefully disconnect the connector cables attaching the screen to the motherboard. Once all the cables are disconnected, remove the damaged screen.

Step 6: Install the New Screen

Attach the new Pantalla táctil Azumi to the phone, ensuring to carefully connect all connector cables.

Step 7: Reassemble the Phone

Reattach the screen assembly to the body of the phone, screw in the screws, insert the battery, and finally snap the back cover into place.

Power on your phone to check the new screen is working correctly.