Blackview A80S spare parts

Blackview A80S Repuestos Technical Specifications

Here are the specific technical characteristics of Blackview A80S smartphone parts and accessories, also known as 'repuestos'.

Screen Replacement

• Screen Size: 6.21 inches
• Resolution: 720 x 1520 pixels
• Material: IPS LCD capacitive touchscreen

Battery

• Capacity: 4200mAh
• Type: Non-removable Li-Po

Other Parts and Accessories

• Camera: Quad 13 MP (main camera)
• RAM: 4GB
• ROM: 64GB (expandable up to 128GB with microSD card)

Instructions to Replace Blackview A80S Repuestos

The following are step-by-step instructions on how to replace individual parts of the Blackview A80S. Please note that replacing these parts requires precision and patience. If not done properly, it can cause more damage to the smartphone. Proceed at your own risk.

Screen Replacement

Follow these steps to replace the Blackview A80S screen:

• Shutdown your smartphone.
• Remove SIM cards and the SD card.
• Use a heat gun or heating pad to warm up the edges of the screen to make the adhesive loose.
• With a plastic opening tool, pry open the screen carefully starting from one edge.
• Once the screen is disjointed, disconnect the screen flex cable from the motherboard.
• Replace the broken screen with the new one. Connect the new screen's flex cable to the motherboard.
• Apply adhesive on the edges of the new screen and fix it on the body of the smartphone.
• Switch on the phone to confirm the screen is working properly.

Battery Replacement

To replace the battery of the Blackview A80S, here are the steps:

• Power off the phone.
• Remove the back plate of the phone using a screwdriver.
• Remove the screws that hold the battery place.
• Carefully disconnect the battery connector from the motherboard.
• Insert the new battery and connect it to the motherboard.
• Screw back the battery holder and the back plate.
• Power on the phone to check if the new battery works.