Blackview BV7200 spare parts

Blackview BV7200 Repuestos: Technical Characteristics

The Blackview BV7200 Repuestos constitute important spare parts designed to replace damaged components on the BV7200 smartphone. The repuestos consist of several components. Here, we detail some of their technical characteristics.

• Display Module: The screen module is a 720 x 1440 pixels, 18:9 ratio (~293 ppi density) IPS LCD capacitive touchscreen.
• Battery: The BV7200 uses a Non-removable Li-Po 5580 mAh battery.
• Camera Assembly: The replacement parts include a Dual 13 MP, (wide), AF and 0.3 MP, (depth) assembled module with LED flash, panorama and HDR capabilities.
• Motherboard: The BV7200 is powered by a MediaTek MT6739 (28 nm) chipset with a Quad-core 1.5 GHz Cortex-A53 CPU and PowerVR GE8100 GPU.

Instructions to Replace Blackview BV7200 Repuestos

Always remember to take necessary precautions like backing up data and powering off your device. Tools you might need include a SIM card ejection tool, a plastic removal tool, tweezers and a screwdriver.

Disassembling:

• Remove the SIM Card Tray: Insert your SIM card ejection tool into the hole on the SIM card tray and push until the tray pops out.
• Remove Back Cover: Use a heated iOpener or heat gun to soften the adhesive on the back cover. Then use the plastic removal tool to pry open the cover.
• Disconnect Battery: Locate and disconnect the battery connector from the motherboard using the plastic spudger tool.

Replacement Procedure:

• Motherboard: Use the screwdriver to remove all screws. Carefully disconnect all flex cables connected to the motherboard, then lift the motherboard from the chassis.
• Screen: Heat the front panel to soften the adhesive. Use the plastic tool to separate the display. After cleaning any residue, apply new adhesive and fit the new screen.
• Battery: Pry the battery free using the plastic removal tool. Replace with a new identical battery, making sure to align any connection points, and press down to secure.
• Camera: Use the plastic tool to disconnect the flex cable, and carefully lift the camera module from the phone. Replace with a new camera module and carefully press into place.

Reassembling:

For reassembling, follow the disassembling steps in reverse order. Make sure all connections are secure, screws are replaced properly and seals are intact before powering up your device.