Blackview P6000 spare parts

Technical Specifications of Blackview P6000 Repuestos

The Blackview P6000 Repuestos parts feature advanced characteristics. Below, you will find the details of these technical features:

• Display: IPS LCD capacitive touchscreen, 16M colors.
• Size: 5.5 inches, 83.4 cm² (~70.3% screen-to-body ratio).
• Resolution: 1080 x 1920 pixels, 16:9 ratio (~401 ppi density).
• OS: Android 7.1 (Nougat).
• CPU: Octa-core (4x2.5 GHz Cortex-A53 & 4x1.0 GHz Cortex-A53).
• Memory: 64GB 6GB RAM.
• Battery: Non-removable Li-Po 6180 mAh battery.

Instructions for Replacing Blackview P6000 Repuestos

Replacing parts in your Blackview P6000 requires careful attention. Please follow the steps below:

Preparation

• Make sure you have all the necessary tools – a screwdriver, plastic opening tools, and a replacement part.
• Power off your Blackview P6000 phone to avoid any electrical interference.

Opening the Blackview P6000

• Use a plastic opening tool to gently pry up the back cover from the bottom of the phone. Run the tool along the sides until the back cover unclips and can be removed.

Removing the Old Repuestos

• Unscrew all the visible screws that secure the internal assembly.
• Now, you can access and disconnect the faulty part. Be cautious to avoid causing any accidental damage to the nearby parts.

Replacing with New Repuestos

• Once removed, replace the old Repuestos with the new one. Make sure it's correctly fitted into its slot.
• Secure it by re-screwing all the screws you had initially removed.

Reassembling the Device

• Once the new part is firmly attached, reassemble your phone by reattaching the back cover. Make sure it clips in securely around the entire edge of the phone.
• Power on your phone to check if the new part is working correctly.

Note: If you find any component not functioning correctly, go back through the steps to ensure everything is properly in place and secured.