Blackview S6 spare parts
There are 15 products.Technical Characteristics of Blackview S6 Repuestos
The Blackview S6 Repuestos are a range of replacement parts for the Blackview S6 smartphone. The characteristics of these components are:
- Screen: 5.7" HD+ IPS Display.
- Battery: Rechargeable 4180mAh, non-removable.
- Camera: Dual Rear Cameras (8.0 MP + 0.3 MP) and Front Camera 5.0MP.
- Processor: Q...
Technical Characteristics of Blackview S6 Repuestos
The Blackview S6 Repuestos are a range of replacement parts for the Blackview S6 smartphone. The characteristics of these components are:
- Screen: 5.7" HD+ IPS Display.
- Battery: Rechargeable 4180mAh, non-removable.
- Camera: Dual Rear Cameras (8.0 MP + 0.3 MP) and Front Camera 5.0MP.
- Processor: Quad Core 1.3GHz.
- Memory: RAM 2GB, ROM 16GB, expendable up to 32GB.
- Operating System: Android 7.0.
Instructions to Replace Blackview S6 Repuestos
Preparation
Be sure to power off your device and remove the SIM and memory card if any. Also, ensure you have the necessary tools including a SIM card ejector tool, a screwdriver, a spudger, and a pair of tweezers.
Replacing the Battery
- Remove the screws at the bottom of the device.
- Using a spudger, gently pry open the back case.
- Locate the battery connector and disconnect the battery flex.
- Lift the battery out of its compartment using the spudger.
- Place a new battery in the compartment and connect the battery flex.
Replacing the Screen
- After removing the back case as mentioned above, locate and disconnect the display connector.
- With a spudger, slowly pry the old screen off from the top edge.
- Once disconnected, fix the new screen onto the front assembly and connect the display connector.
Replacing the Camera
- Follow the initial steps to remove the back case.
- If replacing the rear camera, disconnect the connector cable.
- For the front camera, disconnect the connector cable and remove the two screws securing the front camera module.
- Insert the new camera and reattach the connector cable.
Remember, after replacing the part, reattach the back cover and screw it back in place. Power on your device to confirm that the replacement has been successful.
Less More Showing 1 - 15 of 15 items
Available
Available
Available
Available
Disponible
Available
Available
Disponible
Disponible
Available
Disponible
Disponible
Disponible
Available
Out of stock