Cubot C20 spare parts

Technical Characteristics of Cubot C20 Repuestos

The Cubot C20 is a wallet-friendly smartphone with robust specifications. When looking for replacement parts, or "repuestos", it's critical to understand the device's technical specifications.

• Processor:

  Mediatek Helio P60 Octa-Core

• Display:

  6.18 inches IPS, Full HD+

• Memory:

  4GB of RAM

• Storage:

  64GB with MicroSD card expansion

• Battery:

  4200mAh

• Rear Camera:

  Dual 12MP + 20MP

• Front Camera:

  13MP

Instructions on How to Replace Cubot C20 Repuestos

Tools Needed

Replacement parts for Cubot C20, screwdriver, plastic opening tools, spudger tool, tweezers, adhesive.

Process

• Step 1: Power Off

  Turn off your Cubot C20 to prevent any possible short-circuit

• Step 2: Open the Phone

  Using the plastic opening tool, gently pry the back cover off. If necessary, you can apply a little heat to soften the adhesive.

• Step 3: Remove the Battery

  Unplug the battery connector and use the spudger tool to carefully lift the battery free of its adhesive.

• Step 4: Take Out Damaged Parts

  Depending on which component needs replacing, you might need to remove additional screws or plugs. Use your tools wisely, avoid forcing any component out.

• Step 5: Install the New Part

  Once the old part is safely removed, install the new Cubot C20 replacement device. Make sure to properly fit all connectors and apply necessary adhesive where needed.

• Step 6: Reassemble the Phone

  After the new part is properly installed, place the battery back in its slot, connect it, and gently snap the back cover into place. Make sure all components fit perfectly before snapping the cover of the phone back on.

• Step 7: Test the New Part

  With reassembly completed, power on the device and ensure that the new replacement part is fully functional.