Cubot Manito spare parts

Cubot Manito Technical Specifications

The Cubot Manito repuestos boasts respectable specifications for its budget-friendly segment. This device operates on the Android 6.0 system and has a Quad-Core 1.3 GHz processor for a smooth user experience.

• Display: 5.0 inch HD IPS screen
• Processor: MT6737 Quad-Core 1.3 GHz
• Memory: 3GB RAM + 16GB ROM
• Operating System: Android 6.0
• Camera: 13.0MP rear camera + 1.3MP front camera
• Battery: 2350 mAh

Intructions on replacing Cubot Manito repuestos

Please be careful when replacing components, as damage can occur if not correctly done. Always remember to power off your device and remove the battery if possible before starting.

Step 1: Removing the back cover

Begin by removing the back cover. You can do this by gently prying it off from the notch on the bottom-right corner of the phone.

Step 2: Removing the battery

Once the back cover is removed, the battery is exposed. To remove it, gently lift it from the phone keeping in mind not to puncture or bend it.

Step 3: Removing the Circuit Board

After removing the battery, use a reliable prying tool to carefully lift the motherboard from the device. Be sure to disconnect all connectors attached to it to avoid damaging the cable or the board.

Step 4: Replacing the component

With the circuit board removed, you can now replace the faulty component. Reassemble your device in the reverse order of disassembly.

Remember, care and patience is critical to successful smartphone repair.