Cubot P60 spare parts

Cubot P60 Repuestos Technical Characteristics

The Cubot P60 smartphone is a top-notch gadget with a range of sophisticated features designed to suit the modern user.

• Operating System: Android 10
• Processor: MediaTek MT6771 Helio P60 Octa-core
• RAM: 6GB
• Internal Storage: 128GB, expandable via MicroSD up to 256GB
• Display: 6.3 inch HD+ In-cell Display
• Battery: 4200mAh
• Rear Camera: 48MP main camera and 16MP ultra wide-angle lens
• Front Camera: 20MP
• Connectivity : WiFi, Bluetooth 4.2, GPS, GLONASS, Dual SIM, 4G LTE

Instructions for Replacing Cubot P60 Repuestos

Tools Needed

• Small Phillips Screwdriver
• Plastic Opening Tools
• Heat Gun or Hair Dryer
• Tweezers

Steps for Replacing Cubot P60 Repuestos

Please note that these steps handle the most common repairs, such as screen replacement and battery replacement.

• Switch off your Cubot P60 device.
• Remove the SIM card tray from the device.
• Use the heat gun or hair dryer to heat the edges of the device. This loosens the adhesive binding the back panel.
• Use the plastic opening tool to gently pry open the back cover from the bottom edge.
• Remove the screws around the camera module and the battery compartment using the Phillips screwdriver.
• Disconnect the battery from the motherboard. If replacing the battery, you can now remove and replace it.
• If replacing the screen, proceed to disconnect the display cable from the motherboard. Carefully remove the old screen. Attach the new screen after making sure it's properly aligned.
• Reassemble the device by going through these steps in reverse order.

Always remember to keep track of your screws and other small components. Be gentle in your repairs to avoid damage to your device.