Cubot R15 spare parts

Cubot R15 Repuestos Technical Characteristics

The Cubot R15 smartphone is a great device known for its remarkable features. The common Cubot R15 Repuestos component includes the Screen digitizer, Battery, and Rear Camera. Here are the technical characteristics of these repuestos:

Screen Digitizer

• Size: 6.26 Inches
• Type: IPS, Capacitive Screen
• Resolution: 1520 x 720 Pixels

Battery

• Capacity: 3000mAh
• Type: Detachable, Li-polymer Battery

Rear Camera

• Pixel: 8.0MP + 2.0MP
• Auto Focus: Support
• Flash: Yes

Instructions on How to Replace Cubot R15 Repuestos

Before starting any repair process, make sure you have all the required tools and new parts.

Screen Digitizer Replacement

Follow these steps to replace the screen digitizer:

• Switch off the phone and remove the SIM card tray.
• Heat the edges of the screen to soften the adhesive.
• Use a plastic opening tool to pry the screen off.
• Gently disconnect the screen connector from the motherboard.
• Attach the new screen and connect it to the motherboard.
• Paste the screen to the phone.

Battery Replacement

Follow these steps to replace the battery:

• Turn off the phone and remove the back panel.
• Remove the screws holding the metal shield over the battery connector.
• Disconnect the battery connector and carefully pry the battery up and out of the phone.
• Place your new battery into the phone and connect it.
• Replace the back panel and fasten the screws.

Rear Camera Replacement

Follow these steps to replace the rear camera:

• Power off the phone and remove the back panel.
• Locate the rear camera and carefully disconnect it from the motherboard.
• Place the new camera into the phone and connect it to the motherboard.
• Put back the back panel and switch on the phone.