Cubot X15 spare parts

Cubot X15 Specifications

The Cubot X15 is a durable and efficient smartphone that features:

• Screen: 5.5-inch 1080P IPS Screen with 267 PPI
• Processor: Quad-Core, 1.5GHz Processor
• RAM: 2GB RAM
• Storage: 16GB, expandable up to 32GB
• Camera: 8MP front and 16MP rear
• Battery: 2750mAh
• Connectivity: Wi-Fi, Bluetooth
• System: Android 5.1 OS

Replacing Cubot X15 Repuestos

Before you start, make sure you have the necessary tools: a heat gun, a prying tool and a PH000 screwdriver.

Step 1: Turn the phone off

Press and hold the power button. Choose the "Power off" option and confirm your choice to shut down the phone.

Step 2: Remove the back cover and battery

Start at a corner and carefully insert the prying tool between the back cover and the frame of the phone. Slide the prying tool around the body, releasing the clips that hold the back panel. After removing the back cover, remove the battery using the same prying tool.

Step 3: Remove the old repuestos

After taking off the battery, locate the repuestos that need to be replaced. Carefully use the PH000 screwdriver and remove any screws securing the component to the phone. Remember where each screw came from as they may vary in size.

Step 4: Install the new repuestos

Place the new repuestos in the same spot where the old one was. Replace and tighten the screws that you previously removed, to secure the new parts.

Step 5: Reassemble the phone

Place the battery back in its slot. Secure the back cover by pressing it into the frame until you hear the clips engaging. Power up your phone, and it should be good to go.

Remember to perform this replacement in a clean and ample space. If you encounter any issues during replacement, contact a professional.