Doogee BL12000 spare parts

Technical Characteristics of Doogee BL12000 Repuestos

The Doogee BL12000 repuestos are replacement parts designed specifically for the Doogee BL12000 smartphone model. They maintain the high performance and reliability expected from the original components.

• Display: 6.0 inch, 2160 x 1080 Pixel screen
• Battery: 12000mAh
• Camera: Front Camera: 16.0MP+8.0MP, Rear Camera: 16.0MP+13.0MP
• Memory: RAM: 4GB, ROM: 32GB

Instructions for Replacing Doogee BL12000 Repuestos

Replacement of the Doogee BL12000 repuestos requires technical prowess and precision. Always ensure to power off the device before attempting any repair or replacement process.

Step 1: Remove the Back Cover

Start by removing the back cover of the smartphone. This can be accomplished by using a flat tool to gently pry open the back cover from the charging port side of the device.

Step 2: Take Out the Battery

Unscrew the protective metal plate on top of the battery connector using a small Philips screwdriver. Disconnect the battery connector and gently lift out the battery.

Step 3: Disconnect and Remove the Faulty Component

• If it's the screen: Disconnect the screen cable from the motherboard. Unscrew and carefully remove the screen.
• If it's the camera: Unscrew and remove the camera, ensuring to disconnect the camera cable from the motherboard.
• If it's the memory card: Gently slide out the memory card from its slot on the phone’s frame.

Step 4: Install the Replacement Part

Properly connect the replacement part onto the motherboard and screw it into place. If you're replacing a memory card, make sure it slots in correctly.

Step 5: Reassemble the Device

Place the battery back into its slot and reconnect the battery connector. Screw the metal plate back onto the battery connector. Attach the back cover and ensure all sides are snapped in place.

Please note that all instructions should be followed diligently to avoid damage to the phone. If unsure about any step, consult a professional for assistance.