Doogee S89 spare parts

Technical Characteristics of Doogee S89 Repuestos

The Doogee S89 repuestos is known for its robust build and quality parts. It is designed to withstand harsh conditions, making it a highly durable phone model. Here are its notable technical characteristics:

• Processor: MediaTek Helio P90
• Operating System: Android 10
• Memory: 6GB RAM, 128GB ROM
• Display: 6.3" FHD+
• Battery: 10050mAh
• Camera: 16MP Front Camera, 24+8MP Rear Camera

Instructions for Replacing Doogee S89 Repuestos

Tools Required

• Screwdriver
• Pry tool
• Heat gun or hairdryer

Procedure

Always remember to power off your device before beginning the replacement process to avoid any short circuits.

1. Remove the screws located at the bottom of the phone near the charging port.
2. Using a heat gun or hairdryer, apply slight heat all over the display to loosen the adhesive.
3. Carefully pry the display screen using the pry tool, starting from the bottom upwards. Do not force it open - just slowly slide the pry tool around the edges.
4. Once the screen is detached, locate the cable connecting the screen to the motherboard and disconnect it by gently pulling it out.
5. After removing the old screen, connect the new one using the same cable that connected the old screen.
6. Once connected, test the new screen by turning on the phone. If it works properly, proceed to the next step.
7. After verification, carefully lay down the new screen, ensuring that it aligns accurately with the frame.
8. Secure the new screen by screwing down previously removed screws.

Remember to perform these steps with due caution. If you're unsure about any step, be sure to contact a professional.