Touch screen Doogee

Doogee Touch Screen Technical Specifications

The Doogee touch screen, also known as Pantalla táctil Doogee, is a vital component of any Doogee smartphone device. Its primary purpose is to display visuals and enable tactile interaction with the user interface.

Display Characteristics

• The screen type is an IPS, capacitive, multi-point-touch panel.
• The screen size varies depending on the device model, but it typically ranges between 5 to 6 inches.
• The screen resolution also differs based on the model, with pixel density ranging from 720 x 1280 pixels to 1080 x 2160 pixels.

Replacing the Pantalla táctil Doogee: A Step by Step Guide

Please make sure you have all the necessary tools and components before you commence the replacement process. Note that the process requires patience and careful handling of the device.

Step 1: Power Off the Device

Turn off your Doogee smartphone to prevent any damage from short-circuiting or electrostatic discharge.

Step 2: Remove the Back Cover and Battery

Use a prying tool to remove the back cover. After this, locate and remove the battery of the phone.

Step 3: Unscrew and Remove the Screen

Identify the screws around the screen area and unscrew them. Be careful not to misplace these screws as they're typically small and easy to lose.

Step 4: Replace the Screen

After removing the old screen, install your new Pantalla táctil Doogee. Ensure it aligns correctly with the device.

Step 5: Reassemble the Device

Finally, screw in the new screen, replace the battery and the back cover. Make sure to press firmly but gently to ensure that everything fits back together properly.

Step 6: Power On the Device

Last but not least, power on your device to check the functionality of the new screen. If all goes well, your new Pantalla táctil Doogee should display visuals and respond to touch as expected.