Htc Google Pixel 2 spare parts

    There are 24 products.

    HTC Google Pixel 2 Repuestos: Technical Characteristics

    The HTC Google Pixel 2 is known for its high performance and distinctive standards in design and operability. Here are the primary technical characteristics of these repair components:

    • Display: HTC Google Pixel 2 features a 5-inch Full HD OLED display with (1920 x 1080) resolution.
    • ...

    HTC Google Pixel 2 Repuestos: Technical Characteristics

    The HTC Google Pixel 2 is known for its high performance and distinctive standards in design and operability. Here are the primary technical characteristics of these repair components:

    • Display: HTC Google Pixel 2 features a 5-inch Full HD OLED display with (1920 x 1080) resolution.
    • Battery: It uses a non-removable Li-Ion 2700 mAh battery that offers fast charging capabilities.
    • Camera: The rear camera is a 12.2 MP lens with f/1.8, while the front camera is an 8 MP lens with f/2.4.
    • Internal Components: Inside, the Google Pixel 2 features a Qualcomm Snapdragon 835 processor, with 4GB LPDDR4x RAM. It also comes in internal storage options of 64GB and 128GB.

    Instructions to Replace HTC Google Pixel 2 Repuestos

    Follow these steps carefully:

    Tools required:

    • Heat gun or heat pad
    • Plastic opening tool
    • Tweezers
    • Screwdriver
    • Spudger

    Steps:

    1. Switch off the phone: Always ensure the device is powered off before you start any repair process.
    2. Remove the SIM card tray: This is essential before you proceed any further to prevent damage to the SIM card or Tray.
    3. Heat the edges: Use a heat gun or heat pad to soften the adhesive around the screen edges. Be careful not to overheat and damage internal components.
    4. Use a plastic opening tool: This helps to lift the screen gently without scratching it. Start from a corner and move around the edges.
    5. Disconnect the display cables: After lifting the screen, use a spudger to disconnect the display cables from the motherboard. Remove the old screen and clean the adhesive residue.
    6. Reconnect the new display: Connect the display cable of the new screen to the motherboard. Ensure the connectors snap properly into place. Carefully place the new screen onto the frame, making sure it fits perfectly.
    7. Reassembly: Once everything is in place, reassemble the device by following the disassembly process in reverse.

    Remember, careful handling is key to successfully replacing HTC Google Pixel 2 Repuestos.

    Less
    More
    Showing 1 - 24 of 24 items