Hisense U981 repuestos

Technical Characteristics of Hisense U981 Repuestos

The Hisense U981 repuestos, or replacement parts, include several components of the smartphone that could need replacement over the course of a phone's life. Below you'll find a list of the parts and their main features:

• Screen: The Hisense U981 features a 5.5 inch FWVGA TN display, with 854 x 480 pixels resolution.
• Battery: The phone utilizes a removable Lithium-ion (Li-ion) battery, with a capacity of 2000mAh.
• Camera: The device is equipped with a 5 megapixels rear camera and a 0.3 megapixels front camera.
• Motherboard: This contains the MediaTek Quad-core 1.2 GHz Cortex-A7 CPU and the Mali-400 GPU, among other components.

Instructions for Replacing Hisense U981 Repuestos

Screen Replacement

For a screen replacement, you will need a spudger, a tweezer, and a heat gun:

• Use the heat gun to warm up the screen edges to soften the adhesive.
• Slowly pry open the screen using the spudger.
• Disconnect the screen flex cable from the motherboard.
• Install the new screen, reconnect the flex cable, and reassemble the device.

Battery Replacement

To replace the battery, you'll need a spudger and a plastic opening tool:

• Open the back cover using the plastic opening tool.
• Unplug the battery connector from the motherboard using the spudger.
• Remove the old battery, place in the new one, and reconnect it to the motherboard.
• Finally, reattach the back cover.

Camera Replacement

If you're replacing the camera, you'll need a spudger and a Phillips screwdriver:

• Open the back cover and disconnect the battery.
• Unscrew the screws holding the camera in place.
• Use the spudger to disconnect the camera from the motherboard.
• Attach the new camera, screw it into place, reconnect the battery, and close the back cover.

Motherboard Replacement

For a motherboard replacement, a spudger, tweezer, and small Phillips screwdriver are required:

• Disconnect the battery and screen flex cable.
• Unscrew all screws holding the motherboard in place.
• Use the spudger to lift the motherboard out.
• Place the new motherboard, screw it in, reconnect the battery and screen, and close the device.