Homtom C8 spare parts

Technical Characteristics of Homtom C8 Repuestos

The Homtom C8 is a smartphone that provides solid performance with its specific technical parts, commonly referred to as 'repuestos'. The major technical characteristics of these Homtom C8 repuestos include the following:

• Screen: This Homtom C8 repuesto is a 5.5" HD+ display with 18:9 aspect ratio. It provides a crisp and clear view.
• Processor: The Homtom C8 features a MediaTek MT6739 Quad-core processor which allows for efficient and fast operation.
• Battery: Homtom C8 comes with a 3000mAh battery which can support your daily smartphone operations.
• Memory: It is equipped with 2GB RAM memory with an internal storage capacity of 16GB, which is expandable via microSD.
• Camera: The smartphone features a dual rear camera with 13MP+2MP sensors and a front selfie camera with an 8MP sensor.

Homtom C8 Repuestos Replacement Instructions

Replacing the Homtom C8 repuestos requires careful attention and the right toolkit. Follow these steps for a successful replacement:

Tools Needed

Before you start the replacement process, ensure that you have a SIM Card Ejector, a Phillips Screwdriver, Tweezers, a Spudger, and an Opening Tool.

Steps to Replace Homtom C8 Repuestos

• Switch off your Homtom C8: Before starting, ensure the phone is completely shut off to prevent any possible damage.
• Remove SIM Card Tray: Use a SIM Card Ejector to remove the SIM Card Tray from the phone.
• Remove Back Cover: Use an Opening Tool to loosen and remove the back cover. Start from one corner and work your way around the device.
• Detach Battery Connector: Utilize the Tweezers to detach the battery connector from the motherboard.
• Remove Screws: Use the Phillips Screwdriver to remove screws securing the motherboard. Keep the screws safe as they will be needed for reassembly.
• Replace Desired Part: Depending on what component you are replacing (like the Battery, Camera etc), disconnect the relevant cable from the motherboard and replace it with the new part.
• Reassembly: Once the new part is in place, follow the above steps in reverse order to reassemble your device.