Homtom Zoji Z8 spare parts

    There are 5 products.

    Technical Characteristics of Homtom Zoji Z8 Repuestos

    The Homtom Zoji Z8 repuestos are replacement components for the Homtom Zoji Z8 smartphone, which includes:

    • Display: The IPS screen measures 5.0 inches with a resolution of 1280x720 pixels.
    • Processor: It is powered by a MediaTek MT6750 processor
    • Memory: Comes with 4GB of RAM and 64GB of inter...

    Technical Characteristics of Homtom Zoji Z8 Repuestos

    The Homtom Zoji Z8 repuestos are replacement components for the Homtom Zoji Z8 smartphone, which includes:

    • Display: The IPS screen measures 5.0 inches with a resolution of 1280x720 pixels.
    • Processor: It is powered by a MediaTek MT6750 processor
    • Memory: Comes with 4GB of RAM and 64GB of internal storage plus microSD extension.
    • Battery: 4250mAh battery.
    • Camera: The primary camera is of 16 Megapixels and 8 Megapixel front camera.

    Steps To Replace Homtom Zoji Z8 Repuestos

    Before starting, ensure that the phone is powered off, and that you're working in a dust-free and static-free work environment. Also, ensure that you have a precision screwdriver set appropriate for mobile device repairs.

    Step 1: Open the Device

    Use a suitable tool to gently pry open the back cover of the device. Be careful not to apply too much force as it might crack the cover or damage the internal components.

    Step 2: Remove the Battery

    To remove the battery, you will need to disconnect the battery connector from the motherboard of the device. After disconnecting the battery connector, you can easily lift the battery out.

    Step 3: Replace the Damaged Part

    At this point, you should be able to see the component you need to replace. Whether it's a screen, a camera module, or a speaker, you often need to remove one or more screws to get the component out. Once you've got the old component out, you can install the new one in its place. It is advised to handle all components with clean, latex gloves to avoid any damage.

    Step 4: Reassemble the Device

    Once you've replaced the necessary parts, you should reassemble the device. Begin by placing the battery back in its compartment, then reconnect the battery connector to the motherboard. Finally, reattach the back cover to the device.

    Please note that opening the device on your own may void its warranty. Thus, if your device is still under warranty, you might want to consider taking it to an authorized service center.

    Less
    More
    Showing 1 - 5 of 5 items