HTC E9 Plus repuestos

Technical Characteristics of HTC E9 Plus Repuestos

The HTC E9 Plus is a high-quality smartphone equipped with excellent features. Here are its major technical characteristics:

• Screen: 5.5 inches, 1440 x 2560 pixels, Corning Gorilla Glass
• Operating System: Android OS, v5.0 (Lollipop), upgradable to v6 (Marshmallow)
• Processor: Mediatek MT6795M Helio X10
• Storage: 32GB internal, expandable up to 256GB via MicroSD
• Camera: 20 MP rear camera, 13 MP or 4 MP front camera
• Battery: Non-removable Li-Po 2800 mAh battery

Instructions for Replacing HTC E9 Plus Repuestos

Preparation

Before beginning with the replacement process, ensure you have the necessary tools, including a Phillip's head screwdriver, a pry tool, and a replacement component.

Step 1: Power Off and Remove SIM Tray

Start the procedure by powering off your HTC E9 Plus. Next, remove the SIM card tray from the side of the device.

Step 2: Remove Back Cover

Use a pry tool to gently separate the back cover from the body of the device. Start from one corner and gently move around the edges.

Step 3: Disconnect and Remove the Battery

Once the back cover is off, you will see the battery. Disconnect it first before you remove it from its place.

Step 4: Remove Internal Parts

Remove the screws around the edge of the phone to detach the frame. Carefully lift the mainboard and remove it. Be sure to disconnect all cables and connectors attached to it.

Step 5: Place the New Repuestos

Now, you can place your new repuestos in the empty space. Start with the mainboard, re-connect all previously detached connectors and cables, and screw it in place. Next, put the new battery, connect it and place the back cover.

Step 6: Reassemble the Phone

Once all the repuestos are securely in place, you can reassemble the phone. Attach the back cover securely, insert the SIM tray, and power on your device.

Note: This is a general guide, disassembly and reassembly may differ slightly depending on the specific repuestos being replaced.