Honor P50 Pocket spare parts

    There are 17 products.

    Honor P50 Pocket Repuestos: Technical Characteristics

    The Honor P50 Pocket smartphone is a premium device from the Honor brand. When it comes to replacement parts, or repuestos, these are some of the main components:

    • Display: A 6.53-inch OLED panel with a resolution of 1200 x 2640 pixels
    • Processor: Qualcomm Snapdragon 778G
    • Battery...

    Honor P50 Pocket Repuestos: Technical Characteristics

    The Honor P50 Pocket smartphone is a premium device from the Honor brand. When it comes to replacement parts, or repuestos, these are some of the main components:

    • Display: A 6.53-inch OLED panel with a resolution of 1200 x 2640 pixels
    • Processor: Qualcomm Snapdragon 778G
    • Battery: A 4000 mAh Lithium Polymer battery
    • Cameras: The main camera consists of a 64+8+2MP triple-camera setup, and there is a 32MP front camera.

    Honor P50 Pocket Repuestos: Replacement Guide

    Before you start the repair process, make sure you have the correct repuestos and tools.

    Preparing for the Process

    Here are the steps to prepare for the replacement:

    • Switch off the phone completely to prevent any short circuits.
    • Prepare a clean, flat workspace to operate on.
    • Make sure you have a set of precision screwdrivers and a prying tool.

    Replacing the Display

    Follow these steps to replace the display:

    • Remove the SIM card tray from the phone.
    • Heat the edges of the screen to soften the adhesive. Be careful not to overheat the device.
    • Using a thin prying tool, slowly lift the display starting from one edge.
    • Once the display is removed, disconnect the display connector by unscrewing the bracket.
    • Replace with the new display and reconnect the display connector. Make sure it's firmly connected.
    • Attach the new display to the phone and press down firmly to ensure the adhesive sticks properly.
    • Replace the SIM card tray.

    Replacing the Battery

    Follow these steps to replace the battery:

    • Gain access to the inner parts of the phone by following the 'Replacing the Display' guide above.
    • Locate and remove the screws holding the protective cover over the battery connector.
    • Unclip the battery connector and the two adhesive tabs securing the battery.
    • Slowly lift out the battery, being careful not to damage any adjacent parts.
    • Place the new battery into the empty slot and replace the adhesive tabs. Then reclip the battery connector.
    • Replace the protective cover and fasten it with its screws.
    • Replace the display as per 'Replacing the Display' guide above.

    Important Notice

    Repairing a smartphone can be a complex task, and it might void the manufacturer's warranty. Hence, it's recommended to seek assistance from a professional technician if you're unsure about doing it yourself.

    Less
    More
    Showing 1 - 17 of 17 items