Huawei Ascend Y535 repuestos

Huawei Ascend Y535 Repuestos - Technical Characteristics

Display: 4.5 inches (~61.6% screen-to-body ratio)
Screen Resolution: 480 x 854 pixels (~218 ppi density)
Operating System: Android 4.3 (Jelly Bean)
Chipset: Qualcomm MSM8210 Snapdragon 200 (28 nm)
CPU: Dual-core 1.2 GHz Cortex-A7
RAM: 1GB
Internal Storage: 4 GB
Camera: 5 MP rear and VGA front camera
Battery: 1730 mAh

Instructions on How to Replace Huawei Ascend Y535 Repuestos

Tools Needed:

• Small Phillips Screwdriver
• Plastic Opening Tools
• Tweezers

Steps:

1. Power off the device
Turn off your smartphone to avoid any possible short circuit during the repair process.

2. Remove the back cover and battery
Use the plastic opening tools to gently pry off the back cover, then take out the battery.

3. Remove screws
Using the Phillips screwdriver, remove the screws holding the inner cover in place.

4. Remove the inner cover
Again using the plastic opening tools, gently pry off the inner cover.

5. Disconnect and replace Repuestos
Disconnect the faulty repuestos and replace them with the new ones. Make sure they are firmly connected to the motherboard.

6. Reassemble the smartphone
Put the inner cover back on and screw it in place. Install the battery and put the back cover on.

7. Test the device
Turn on your smartphone to test if the new repuestos are working properly.