Huawei Honor Play 4 spare parts

Huawei Honor Play 4 Technical Characteristics

The Huawei Honor Play 4 packed some top-tier specifications:

• Display: 6.81 inches IPS LCD, 1080 x 2400 pixels, 20:9 ratio (~386 ppi density)
• OS: Android 10, Magic UI 3.1, no Google Play Services
• Chipset: MediaTek MT6873V Dimensity 800 5G (7 nm)
• Memory: 6/8GB RAM, 128GB internal storage
• Camera: Quad rear camera (64MP, 8MP, 2MP, 2MP), Single front camera (16MP)
• Battery: Li-Po 4300mAh, non-removable, fast charging 22.5W

Replacement Instructions for Huawei Honor Play 4 Repuestos

Tools Needed

To perform replacement of parts for the Huawei Honor Play 4, the following tools are required:

• Small Phillips Screwdriver
• Spudger
• Tweezers
• Opening Picks

Instructions

Please follow these instructions carefully, as improper handling can lead to permanent damage.

Note: This guide is intended to replace modular parts such as the display, battery and cameras.

1. Battery Replacement

• Turn off the device and remove the SIM tray.
• Remove the back cover using the opening picks.
• Disconnect the battery connector using the spudger.
• Remove the screws securing the battery and lift the battery using the spudger and the tweezers.

2. Display Replacement

Follow the same initial steps as in the battery replacement, then continue with the following:

• Remove the screws securing the display connector, and use the spudger to disconnect the display ribbon cable.
• Using the opening picks, carefully lift the display away from the frame.

After following these instructions, your Huawei Honor Play 4 repuestos should be replaced. Please reassemble the device in reverse order. If you encounter any difficulties, consult a professional.