Huawei Honor V20 spare parts
There are 7 products.Huawei Honor V20 Repuestos - Specifications
The Huawei Honor V20, also known as Honor View 20 in some regions, is a remarkable device with impressive technical characteristics. We have detailed the key repuestos (parts) below:
- Display: LCD touch screen display, measuring 6.4 inches, 1080 x 2310 pixels, 19.5:9 ratio (~398 ppi density)
- Battery:...
Huawei Honor V20 Repuestos - Specifications
The Huawei Honor V20, also known as Honor View 20 in some regions, is a remarkable device with impressive technical characteristics. We have detailed the key repuestos (parts) below:
- Display: LCD touch screen display, measuring 6.4 inches, 1080 x 2310 pixels, 19.5:9 ratio (~398 ppi density)
- Battery: Non-removable Li-Po 4000 mAh battery
- Back Cover: Made of high-quality plastic and glass material
- Cameras: Front camera - 25 MP, f/2.0, 27mm; rear camera - 48 MP, f/1.8, (wide), 1/2", 0.8µm, PDAF, TOF 3D camera
How to Replace Huawei Honor V20 Repuestos
Follow the instructions below closely to replace the primary repuestos of your Huawei Honor V20 device:
Replacing the Display
- Power off your device to ensure safety.
- Utilize a professional-grade suction cup to remove the display, positioned at the bottom of the device.
- Slowly lift the screen, making sure not to damage the connected flex cables.
- Disconnect the screen cables and manually remove the damaged screen.
- Install the new screen and ensure it's securely connected to the device.
Replacing the Battery
- Begin by powering off the device.
- Remove the back cover gently.
- Locate and cautiously disconnect the battery connector.
- Remove the old battery and install the replacement, taking care to connect the connector properly.
Replacing the Back Cover
- Turn off your device to prevent damage.
- Use a professional tool to gently pry open the back cover.
- Once the back cover is detached, install the new back cover carefully.
Replacing the Camera
- Shut down your device first.
- Open the back cover to reach the motherboard.
- Locate the camera, then disconnect the flex cable attached to it.
- Replace the camera and make sure to reconnect the flex cable back to the motherboard.
Please note, these instructions need to be followed very carefully. Make sure to use proper tools and professional assistance if needed. All operations should be performed at your own risk.
Less More
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible