Huawei Mate 30 repuestos

    There are 48 products.

    Huawei Mate 30 Repuestos Technical Characteristics

    The Huawei Mate 30 device holds various highly efficient modules, which are:

    • Display: OLED capacitive touchscreen, 16M colors, 6.62 inches, 107.6 cm2 (~87.9% screen-to-body ratio), 1080 x 2340 pixels.
    • Platform: Android 10, EMUI 10.1, upgradable to Android 11, EMUI 11.
    • CPU: Kirin 990 5G (7 nm+),...

    Huawei Mate 30 Repuestos Technical Characteristics

    The Huawei Mate 30 device holds various highly efficient modules, which are:

    • Display: OLED capacitive touchscreen, 16M colors, 6.62 inches, 107.6 cm2 (~87.9% screen-to-body ratio), 1080 x 2340 pixels.
    • Platform: Android 10, EMUI 10.1, upgradable to Android 11, EMUI 11.
    • CPU: Kirin 990 5G (7 nm+), Octa-core (2x2.86 GHz Cortex-A76 & 2x2.36 GHz Cortex-A76 & 4x1.95 GHz Cortex-A55).
    • Battery: Li-Po 4200 mAh, non-removable (16.04 Wh).
    • Camera: 40 MP, f/1.8, 27mm (wide), 1/1.7", PDAF, LG.

    Instructions for Replacement of Huawei Mate 30 Repuestos

    Please take note of the following outlined steps to be able to effectively and safely replace the Huawei Mate 30 repuestos.

    Tools Needed

    • Small Phillips Screwdriver
    • Precision Tweezers Set
    • Plastic Opening Tools
    • Heat gun or a Professional Hair Dryer
    • ESD-Safe Spudger

    Step-by-step Procedure

    Always remember to switch off your Huawei Mate 30 before commencing any disassembly process.

    • Firstly, use the heat gun to slowly heat the edges of the back cover of Huawei Mate 30. After it's loosened, use the plastic opening tool to gradually pry it open.
    • Now, using your small Phillips screwdriver, remove all screws seizing the plastic covering protecting the motherboard.
    • Next, very carefully disconnect all the connectors with the help of precision tweezers set.
    • Proceed further to remove the shield that covers the bottom board after unscrewing all related screws.
    • Afterward, remove the loudspeaker, undo the battery connector, signal cable and the other connectors.
    • Now, utilize the ESD-Safe Spudger to remove the battery from its slot.
    • Proceed with the same tool to remove the motherboard.
    • At this point, you can replace the necessary repuesto either the Screen, Battery, Camera or any other module as required.
    • After replacement, reassemble the device by following the steps in reverse order.

    Please remember to handle the device delicately throughout the process to avoid any irreparable internal damage.

    Less
    More
    Showing 1 - 30 of 48 items