Huawei P Smart 2021 spare parts

Huawei P Smart 2021 Repuestos Technical Specifications

At the heart of the Huawei P Smart 2021 is a remarkable collection of components that contribute to its incredible performance. Here are the main repuestos, or parts, that make up this device:

• Screen: 6.67" IPS LCD
• Resolution: 2400 x 1080 pixels
• Processor: Kirin 710A
• RAM: 4GB
• Internal storage: 128GB
• Battery: 5000mAh
• Rear camera: 48MP + 8MP + 2MP + 2MP
• Front camera: 8MP

How to Replace Huawei P Smart 2021 Repuestos

Here are the general steps to replace parts on the Huawei P Smart 2021:

Tools Needed

• Phillips #000 Screwdriver
• Plastic Opening tool
• Tweezers
• Spudger
• Heat gun

Instructions

Before you start, make sure your phone is powered off and disconnect it from any power sources.

Step 1: Remove the back cover

• Warm up the edges of the back cover with a heat gun to loosen the adhesive.
• Use a plastic opening tool to pry the back cover off carefully.

Step 2: Remove the battery

• Disconnect the battery connector from the motherboard.
• Gently pry the battery out with a spudger.

Step 3: Replace the desired part

The steps to replace the specific part will depend on the component. Be sure to consult a guide specific to the part you're replacing.

Step 4: Reassemble

• Once you've replaced the faulty part, reassemble your phone by reversing the disassembly steps.

Be aware that opening your device can void your warranty and cause further damage if not done correctly. If you're unsure, seek professional help.