Huawei P40 Pro Plus spare parts

    There are 24 products.

    Huawei P40 Pro Plus Repuestos Technical Characteristics

    The Huawei P40 Pro Plus repuestos are integral parts responsible for the smartphone's optimal function. Here are some of its main components, along with their technical specifications:

    • Display: 6.58-inch, 1200 x 2640 pixels, OLED capacitive touchscreen.
    • Processor: Octa-core, HiSilico...

    Huawei P40 Pro Plus Repuestos Technical Characteristics

    The Huawei P40 Pro Plus repuestos are integral parts responsible for the smartphone's optimal function. Here are some of its main components, along with their technical specifications:

    • Display: 6.58-inch, 1200 x 2640 pixels, OLED capacitive touchscreen.
    • Processor: Octa-core, HiSilicon Kirin 990 5G (7 nm+).
    • RAM: 8GB.
    • Internal Storage: 256/512GB, expandable via nano memory up to 256GB.
    • Camera: Five lenses system including 50 MP wide, 8 MP periscope telephoto, 8 MP telephoto, 40 MP ultrawide and TOF 3D sensors.
    • Battery: Non-removable Li-Po 4200 mAh battery.

    Instructions for Replacing Huawei P40 Pro Plus Repuestos

    Before starting with the steps of repuestos replacement, ensure you have the necessary tools including a screwdriver set, spudger, tweezers, and plastic pry tools.

    Step 1: Power off the Device

    Before you begin, make sure to switch off the Huawei P40 Pro Plus to avoid any electrical damage during the repair process.

    Step 2: Remove the Back Cover

    Heat the edges of the back cover to soften the adhesive. Use a suction cup and a plastic prying tool to safely lift up and remove the back cover.

    Step 3: Disconnect the Battery

    Remove the screws securing the battery connector cover. Use a plastic spudger to gently disconnect the battery connector from the motherboard.

    Step 4: Replace the Required Part

    Depending on which part needs replacement, you may need to further disassemble the device. This could involve unscrewing and removing components, disconnecting ribbon cables, or lifting parts out of the phone's body. Be sure to organize your screws and keep track of all parts removed.

    Step 5: Reassemble the Device

    Once the new part has been installed, reconnect any cables that were disconnected and replace the back cover. Ensure all screws are back in their original places.

    Remember to turn on your Huawei P40 Pro Plus to verify the replacement has been correctly executed. If there is any issue, reassess your work and troubleshoot before reassembling completely.

    Final Reminder

    Please note that opening the Huawei P40 Pro Plus for repair can void your warranty, and if not handled properly, can cause more damage. If you're not confident about performing these steps, consider taking the device to a professional.

    Less
    More
    Showing 1 - 24 of 24 items