2. Mobile Spare parts
  3. Infinix Mobile
  4. Infinix Note 7 X690 spare parts

    Infinix Note 7 X690 spare parts

    There are 3 products.

    Infinix Note 7 X690 Repuestos Technical Characteristics

    The Infinix Note 7 X690 smartphone part, also known as Repuestos, are developed to aid maintenance and repair of the phone. Some key replacement parts include:

    • Screen: Original, OLED, 720 x 1640 pixel Touchscreen
    • Battery: Non-removable Li-Po 5000mAh
    • Camera: 48 MP, f/1.8, (wide), 1/2.0", ...

    Infinix Note 7 X690 Repuestos Technical Characteristics

    The Infinix Note 7 X690 smartphone part, also known as Repuestos, are developed to aid maintenance and repair of the phone. Some key replacement parts include:

    • Screen: Original, OLED, 720 x 1640 pixel Touchscreen
    • Battery: Non-removable Li-Po 5000mAh
    • Camera: 48 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF
    • Motherboard: Replacement motherboard compatible with the MediaTek Helio G70 (12 nm) processor
    • Speakers: In-built audio speakers with audio jack replacements also available

    Instructions for Replacing Infinix Note 7 X690 Repuestos

    WARNING

    Please note that repairing and replacing parts on your Infinix Note 7 X690 should be done by a certified professional to avoid further damage to the phone. Proceed with caution.

    Screen Replacement

    • Power off the smartphone and remove the SIM card tray.
    • Preheat the edges of the screen to soften the glue. Use a thin tool to cut through the adhesive and separate the screen from the phone body.
    • Remove the old screen carefully and replace it with the new one. Ensure the new screen is firmly in place and leave for some minutes for the adhesive to dry.

    Battery Replacement

    • Ensure the device is powered off. Open up the back cover with a pry tool.
    • Remove the screws fastening the battery connector. Detach the battery connector, and remove the battery.
    • Replace the old battery with the new one and reassemble the smartphone.

    Camera Replacement

    • Power down the smartphone. Open the back cover by prying it open with a thin tool.
    • Remove the screws attached to the camera frame and carefully remove the old camera.
    • Install the new camera and re-install the camera frame screws and the back cover.

    Please ensure all procedures are done in a clean, dry and soft environment to avoid damages to the phone's parts.

    Less
    More
    Showing 1 - 3 of 3 items

    My account