iPhone 4S

  • iPhone 4S accesories
  • iPhone 4S spare parts

    iPhone 4S

    There are 106 products.

    Technical Characteristics of iPhone 4S

    The iPhone 4S, part of Apple's line of smartphones, possesses a variety of impressive features that set it apart.

    Design and Display

    Built with a stainless steel frame and aluminosilicate glass front and back, the iPhone 4S is both aesthetically pleasing and durable. Its 3.5-inch display offers a resolution...

    Technical Characteristics of iPhone 4S

    The iPhone 4S, part of Apple's line of smartphones, possesses a variety of impressive features that set it apart.

    Design and Display

    Built with a stainless steel frame and aluminosilicate glass front and back, the iPhone 4S is both aesthetically pleasing and durable. Its 3.5-inch display offers a resolution of 640x960 pixels, with a pixel density of 330 pixels per inch (PPI).

    Performance

    The device operates on the dual-core 1.0 GHz Cortex-A9 processor and 512MB of RAM, providing users with smooth and efficient performance. It utilizes the Apple A5 chipset and PowerVR SGX543MP2 graphics.

    Camera

    The iPhone 4S features an 8-megapixel rear camera with autofocus and LED flash and a VGA front camera. Both cameras are capable of recording video.

    Battery Life

    Offering up to 14 hours of talk time and up to 200 hours of standby time, the iPhone 4S is powered by a non-removable Li-Po 1432 mAh battery.

    iPhone 4S Replacement Instructions

    Replacing the iPhone 4S requires patience and attention to detail. Before you begin, make sure you have the necessary tools: a pentalobe screwdriver, a Phillips #00 screwdriver, a plastic opening tool, and a SIM card eject tool.

    Step 1: Removing the SIM Card

    • Turn off your iPhone 4S.
    • Use the SIM card eject tool to remove the SIM Card Tray.

    Step 2: Removal of the Back Panel

    • Remove the two 3.6 mm Pentalobe screws next to the dock connector on the bottom of the iPhone.
    • Gently push the rear panel toward the top edge of the iPhone to disengage the clips holding it to the rear case.
    • Lift the rear panel away from the iPhone.

    Step 3: Battery Removal

    • Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
    • Use the edge of a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
    • Pull the clear plastic tab on the battery to remove it from the iPhone.

    Proceed with replacing the necessary components, then follow these steps in reverse to reassemble your iPhone 4S.

    Less
    More
    Showing 1 - 30 of 106 items