iPhone 6S plus spare parts

Technical Characteristics of Repuestos iPhone 6S Plus

The Repuestos iPhone 6S Plus represents high-quality replacement parts for your iPhone 6S Plus. Here are some of its fundamental technical features:

• Screen Resolution: 1920 x 1080 pixels
• Screen Size: 5.5 inches
• Touch Type: 3D Touch
• Components: Includes all essential components like the Front Camera, Ear Speaker, Proximity Sensor, and LCD Shield Plate
• Compatibility: Exclusively designed for iPhone 6S Plus

Instructions for replacing Repuestos iPhone 6S Plus

Tools Needed:

You'll need the following tools: a Pentalobe Screwdriver, a Phillips #000 Screwdriver, Spudger, Tweezers, and an iSclack or a suction cup.

Procedure:

• Shut down your iPhone before starting the replacement process.
• Remove the two Pentalobe screws located at the bottom edge of the iPhone using the Pentalobe Screwdriver.
• Place a suction cup (or the iSclack tool) near the home button and gently pull up to open the phone, just like a book.
• Use the Spudger to cut any adhesive connecting the battery to the screen.
• Remove the five Phillips screws securing the front panel assembly cable bracket, and then carefully remove the bracket using tweezers.
• Disconnect the front panel sensor assembly connector from its socket on the logic board.
• Remove the front panel assembly, replacing it with the Repuestos iPhone 6S Plus unit.
• Reassemble your phone, in the reverse order you disassembled it, and switch it on.

Note: Be supposed to power off the phone and work in a static-free environment to prevent any damage to your device. Be especially careful not to touch or strain the ribbon cables in the process.