iPod Touch 2
- iPod Touch 2 spare parts
- iPod touch Accesories 2
iPod Touch 2
There are 13 products.Technical Characteristics of iPod Touch 2
The iPod Touch 2nd generation, also known as iPod Touch 2, was released by Apple in September 2008. It's a popular model and has several key technical characteristics:
- Screen: 3.5 inches, 480 x 320 pixels.
- User Interface: Multi-touch display with IPS technology.
- Processor: 533 MHz Samsung A...
Technical Characteristics of iPod Touch 2
The iPod Touch 2nd generation, also known as iPod Touch 2, was released by Apple in September 2008. It's a popular model and has several key technical characteristics:
- Screen: 3.5 inches, 480 x 320 pixels.
- User Interface: Multi-touch display with IPS technology.
- Processor: 533 MHz Samsung ARM.
- Storage: Available in 8GB, 16GB and 32GB.
- Battery: Built-in rechargeable lithium-ion battery with up to 36 hours of music playback.
- Operating System: Originally shipped with iPhone OS 2.1.2 but can be upgraded to iOS 4.2.1.
- Wireless: Wi-Fi (802.11b/g) and Bluetooth 2.1+EDR technology.
Replacement Instructions for iPod Touch 2
Replacing parts of the iPod Touch 2 requires patience and expertise. Certain parts like the battery may need to be replaced over time. Here are step-by-step instructions to safely replace the iPod Touch 2 battery:
Tools Needed
- Replacement battery for iPod Touch 2: Ensure it's from a trusted source.
- Plastic opening tools: These are used to pry open the device without causing damage.
- Small Phillips #00 Screwdriver: Use this to remove small screws inside the device.
- Spudger: A spudger can assist with disconnecting small connectors.
Steps for Battery Replacement
- Power off the iPod Touch 2.
- Pry open the device: Use the plastic opening tool to carefully pry the metal back of the iPod away from the front panel.
- Remove screws: Use the Phillips #00 screwdriver to remove the 3.3 mm Phillips screw securing the battery to the logic board.
- Detach connectors: Carefully use the spudger to disconnect the battery connector from its socket on the logic board.
- Remove the old battery.
- Insert the replacement battery: Make sure the new battery is seated properly and that the connector attaches securely to the socket on the logic board.
- Replace screws.
- Close the iPod Touch 2: Snap the metal back into place, ensuring that it tightly seals to the front panel.
- Turn the iPod back on to test the new battery.
Please remember, always exercise extreme care when repairing electronic devices. If you're unsure of any step, seek professional assistance.
Less More Showing 1 - 13 of 13 items
Out of stock
Out of stock
Available
Available
Available
Out of stock
Out of stock
Out of stock
Available
Available
Disponible
Disponible
Out of stock