Manufacturer: Leagoo
Model: Lead 4
Manufacturer: Leagoo
Model: Lead 4
Firstly, turn off the Leagoo Lead 4 and unplug any connected cables
Remove the back cover using the spudger. Start from the bottom and slowly clip off all the latches around.
Unscrew all the visible screws with the Phillips screwdriver.
Carefully lift the plastic back frame. Here you will see the battery, motherboard, and other components.
Remove the battery. There is a small tab you can use to pull up the battery. It may be a little tight so you may have to wiggle it a bit.
Below the battery, you will find more screws. Unscrew them as well.
Using the tweezers, carefully remove the connected ribbon cables which connect the motherboard to the other components.
Now you can remove the motherboard. Be careful not to damage any connectors on the board.
Replace the faulty component and then reverse the steps to reassemble your Leagoo Lead 4.