Leagoo Lead 5 repuestos

    There are 2 products.

    Technical Characteristics of Leagoo Lead 5 Repuestos

    The Leagoo Lead 5 smartphone is a mid-range device from Leagoo, a Chinese brand known for providing quality smartphones at accessible prices. It has a few key components, known as 'repuestos' that can typically need replacement over the life of the device.

    • Display: 5.0 inches, 854 x 480 pix...

    Technical Characteristics of Leagoo Lead 5 Repuestos

    The Leagoo Lead 5 smartphone is a mid-range device from Leagoo, a Chinese brand known for providing quality smartphones at accessible prices. It has a few key components, known as 'repuestos' that can typically need replacement over the life of the device.

    • Display: 5.0 inches, 854 x 480 pixels, IPS LCD
    • Battery: 2800 mAh, Removable
    • Processor: MediaTek MT6582, Quad-core 1.3 GHz Cortex-A7
    • RAM: 1GB
    • Storage: 8GB, expandable via MicroSD
    • Camera: 8MP Rear, 3.2MP Front
    • Operating System: Android v4.4.2 (KitKat)

    Replacing Leagoo Lead 5 Repuestos

    Replacing components on the Leagoo Lead 5 requires some basic proficiency with electronics repair. Always remember to power off the device and disconnect it from any power source before proceeding.

    How to Replace the Battery

    • Step 1: Unscrew the two screws at the bottom of the phone.
    • Step 2: Remove the back cover of the phone.
    • Step 3: Carefully disconnect the battery connector from the motherboard.
    • Step 4: Remove the old battery and replace it with the new one.
    • Step 5: Reconnect the battery connector and reattach the back cover.
    • Step 6: Screw back the two screws at the bottom of the phone.

    How to Replace the Screen

    • Step 1: Remove the battery following the steps above, then proceed to step 2.
    • Step 2: Use a pry tool to loosen and lift the screen from the body of the phone starting from the bottom edge.
    • Step 3: Carefully disconnect the LCD's ribbon connector from the motherboard.
    • Step 4: Remove the old screen and replace it with the new one.
    • Step 5: Reconnect the LCD's ribbon connector to the motherboard.
    • Step 6: Secure the new screen onto the body of the phone.
    • Step 7: Replace the battery and reattach the back cover.

    Remember, always be very careful while handling your device and its internal parts to avoid causing further damage.

    Less
    More
    Showing 1 - 2 of 2 items