Leagoo Power 5 spare parts

    There are 7 products.

    Technical Characteristics of Leagoo Power 5

    The Leagoo Power 5 is a smartphone model launched by Leagoo. It has several unique features and components that make it stand out.

    • Operating System: It runs on the Android 6.0 operating system, which also supports multiple app usage.
    • Display: The smartphone has a 5.5-inch screen with a resolutio...

    Technical Characteristics of Leagoo Power 5

    The Leagoo Power 5 is a smartphone model launched by Leagoo. It has several unique features and components that make it stand out.

    • Operating System: It runs on the Android 6.0 operating system, which also supports multiple app usage.
    • Display: The smartphone has a 5.5-inch screen with a resolution of 1920 x 1080 pixels.
    • Processor: It is powered by a 1.5GHz, Octa Core processor for efficient performance.
    • Storage: It has an internal memory of 64GB and supports SD cards up to 128GB for storage expansion.
    • Camera: It features a 13 MP rear camera and a 8 MP front camera for high-quality photos and videos.
    • Battery: It is equipped with a 7000mAh battery that can offer long hours of usage on a single charge.

    Replacement of Leagoo Power 5 Repuestos

    To replace Leagoo Power 5 Repuestos, please follow the steps provided below. Remember, it's important to have the correct tools before initiating the replacement process. Meticulousness and patience are key during this process.

    Tools Needed

    • Philip's head screwdriver
    • Tweezers
    • Plastic opening tools
    • Hot air gun or hairdryer (for parts that are glued)

    Procedure

    Step 1: Turn Off Device

    Ensure the smartphone is powered down to avoid short circuiting.

    Step 2: Remove Back Cover

    Heat the edges gently to loosen the adhesive then pry it open using plastic opening tools. Be careful not to damage internal components.

    Step 3: Disconnect the Battery

    Disconnect the battery from the motherboard. Always initiate from the battery for safety and precautionary measures.

    Step 4: Remove Repuestos

    Here, the process may differ based on the item being replaced. Unscrew where necessary and carefully lift out the component. Use the tweezers for small or delicate components.

    Step 5: Insert New Components

    Place the new component in the same position as the old one and connect it to the motherboard as per its orientation.

    Step 6: Reassemble Phone

    Reconnect the battery, affix the back cover and turn on the phone to check if the new component is working correctly.

    Note

    Always check for compatibility of replacements 'Repuestos' with your device's model. If you don’t feel confident enough to perform these steps, consider seeking help from a professional technician.

    Less
    More
    Showing 1 - 7 of 7 items