Leagoo Z5 spare parts

Technical Characteristics of Leagoo Z5 Repuestos

The Leagoo Z5 repuestos (parts) include a variety of components critical to the operation of your device. These can be required to fix a variety of issues with your Leagoo Z5 mobile phone. Each component has its unique functionality and design elements to achieve smooth operation.

• Display: 5.0 inches with a resolution of 854 x 480 pixels.
• Processor: 1.3GHz Quad-Core.
• RAM: 1GB, Storage: 8GB (extendable up to 32GB).
• Battery: Removable Li-Ion 2300 mAh battery.
• Operating System: Leagoo OS 1.1 (based on Android 6.0).
• Connectivity: Wi-Fi, Bluetooth, Micro-USB, GPS.
• Sensors: Ambient Light Sensor, Gravity Sensor, Proximity Sensor.

Instructions for Replacing Leagoo Z5 Repuestos

Please follow the steps below in the specified order when replacing parts on your Leagoo Z5. Disturbing the order could lead to permanent damage.

Tools You Will Need

• Small Phillips Screwdriver
• Spudger
• Tweezers
• Plastic Opening Tools

Replacing Battery

The battery should be the first part to be replaced as it is the easiest and does not require any tools.

• Power off the device.
• Open the back cover by gripping the notch located at the bottom of the phone.
• Carefully lift the battery from the device using the pull tab.
• Insert the new battery making sure to align the terminals correctly with the device.

Replacing Display

The screen is the most fragile part of the phone and requires extra care and attention.

• Remove the battery as per the instructions above.
• Once the battery is out, use the small Phillips screwdriver to remove the screws holding the screen in place.
• Next, use the plastic opening tools to carefully separate the display assembly from the phone body.
• Carefully detach any remaining ribbon cables connected to the screen using the spudger or tweezers.
• Replace the screen and reassemble the phone by following the steps in reverse order.

Caution: Always ensure the device is disconnected from any power source before starting the replacement process to avoid any electrical damage.