Lenovo A320T repuestos

Technical Characteristics of Lenovo A320T Repuestos

The Lenovo A320T is an affordable smartphone model from Lenovo, with specific replacement parts (repuestos) that can be sourced for repairs. Below are the main technical characteristics of key Lenovo A320T repuestos:

Display

• Size: 4.5 inches
• Type: Capacitive touchscreen
• Resolution: 480 x 854 pixels

Battery

• Type: Li-Ion removable battery
• Capacity: 2000 mAh

Camera

• Main Camera: 5 MP
• Front Camera: 2 MP

Motherboard

• Chipset: Spreadtrum
• CPU: Dual-core 1.3 GHz
• RAM: 512 MB
• Internal Storage: 4 GB

Instructions on How to Replace Lenovo A320T Repuestos

Replacing parts on the Lenovo A320T requires careful disassembly and reassembly. Here are the detailed instructions:

1. Turn Off the Device

Ensure that the Lenovo A320T is completely powered off before starting any repairs.

2. Remove the Back Cover and Battery

• Use a plastic opening tool to gently pry open the back cover of the phone.
• Once the cover is removed, take out the battery by lifting it from the designated groove.

3. Remove the SIM and MicroSD Cards

Slide out and remove any installed SIM and MicroSD cards to avoid damage during the repair process.

4. Unscrew the Back Frame

• Locate all the screws securing the back frame and use a precision screwdriver to remove them.
• Keep the screws in a safe place for reassembly.

5. Open the Back Frame

Carefully pry open the back frame using a plastic opening tool, taking care not to damage the internal components.

6. Disconnect the Battery Connector

Locate the battery connector on the motherboard and gently disconnect it using a spudger tool.

7. Remove the Old Battery (if replacing)

• Lift the old battery out from its compartment.
• If it is glued, use a bit of rubbing alcohol to weaken the adhesive before removing the battery.

8. Install the New Battery

• Position the new battery in the compartment.
• Reconnect the battery connector to the motherboard.

9. Replace the Screen (if replacing)

• Disconnect the screen connectors from the motherboard.
• Use a heat gun or hair dryer to soften the adhesive around the screen.
• Gently pry off the screen starting from one corner.
• Place the new screen and reconnect the screen connectors.

10. Reassemble the Device

• Carefully align and reattach the back frame.
• Secure it with the screws removed earlier.
• Reinsert the SIM and MicroSD cards.
• Snap the back cover in place.

11. Test the Device

Power on the Lenovo A320T and verify that all functions are operational and the new parts are working correctly.