Lenovo A328T repuestos

Lenovo A328T Replacement Parts Technical Characteristics and Replacement Instructions

Technical Characteristics of Lenovo A328T Replacement Parts

1. Display Screen

• Size: 4.5 inches
• Resolution: 480 x 854 pixels
• Type: TFT capacitive touchscreen

2. Battery

• Capacity: 2000 mAh
• Type: Lithium Polymer
• Model: BL192

3. Camera

• Rear Camera: 5 MP
• Front Camera: 2 MP
• Flash: LED

4. Motherboard

• Chipset: MediaTek MT6582M
• CPU: Quad-core 1.3 GHz Cortex-A7
• GPU: Mali-400MP2

5. Other Components

• SIM Card Tray
• Micro USB Charging Port
• Volume and Power Buttons

Instructions on How to Replace Lenovo A328T Replacement Parts

1. Replacing the Display Screen

• Step 1: Power off your Lenovo A328T and remove the back cover to take out the battery.
• Step 2: Use a small screwdriver to unscrew the screws securing the display screen.
• Step 3: Carefully use a plastic pry tool to detach the screen from the frame.
• Step 4: Disconnect the flex cable linking the screen to the motherboard.
• Step 5: Connect the new screen’s flex cable to the motherboard.
• Step 6: Place the new screen onto the frame and secure it with the screws.
• Step 7: Reinsert the battery and power on the device to test the new screen.

2. Replacing the Battery

• Step 1: Power off your Lenovo A328T and remove the back cover.
• Step 2: Remove the old battery by gently lifting it out of the compartment.
• Step 3: Insert the new battery into the battery compartment.
• Step 4: Replace the back cover and power on your device to ensure it’s working properly.

3. Replacing the Rear Camera

• Step 1: Power off the device and remove the back cover and battery.
• Step 2: Use a screwdriver to remove any screws securing the camera module.
• Step 3: Disconnect the old camera module from the motherboard.
• Step 4: Connect the new camera module to the motherboard.
• Step 5: Secure the new camera module with the screws.
• Step 6: Reinsert the battery and back cover, then power on the device to test the camera.

4. Replacing the Motherboard

• Step 1: Power off the device, remove the back cover, and take out the battery.
• Step 2: Unscrew all screws securing the motherboard and gently disconnect all flex cables.
• Step 3: Carefully lift the motherboard out of the device.
• Step 4: Place the new motherboard into the device and reconnect all flex cables.
• Step 5: Secure the new motherboard with the screws.
• Step 6: Reinsert the battery and back cover, then power on the device to ensure it’s working.

5. Replacing the Micro USB Charging Port

• Step 1: Power off the device and remove the back cover and battery.
• Step 2: Unscrew the screws securing the charging port and disconnect any flex cables.
• Step 3: Gently lift out the faulty charging port.
• Step 4: Insert the new charging port and reconnect flex cables.
• Step 5: Secure the new charging port with the screws.
• Step 6: Reinsert the battery and back cover, then power on the device to test charging.