Lenovo A656 repuestos

Lenovo A656 Repuestos - Technical Characteristics and Replacement Instructions

Technical Characteristics of Lenovo A656 Repuestos

• Display: 4.5 inches, 540 x 960 pixels
• Processor: Dual-core 1.2 GHz Cortex-A7
• Memory: 512 MB RAM, 4 GB internal storage
• Expandable Storage: microSD, up to 32 GB
• Camera: Rear 5 MP, Front 0.3 MP
• Battery: 2000 mAh, removable
• Operating System: Android 4.2 (Jelly Bean)
• SIM: Dual SIM
• Connectivity: GPS, Wi-Fi, Bluetooth 3.0, microUSB 2.0

Instructions for Replacing Lenovo A656 Repuestos

Replacing repuestos or parts of your Lenovo A656 requires careful handling and following steps. Below are detailed instructions for replacing the battery, screen, and back cover of your Lenovo A656.

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Spudger
• Adhesive strips (if replacing the screen)

Replacing the Battery

• Power off the device completely.
• Remove the back cover by carefully prying it open with your fingers or a plastic tool.
• Locate the battery and remove it by gently lifting it from the slot.
• Insert the new battery, ensuring it is properly aligned and securely in place.
• Reattach the back cover and press it down until it clicks into place.
• Power on the device to check if the new battery is working correctly.

Replacing the Screen

• Power off the device completely before starting the replacement process.
• Remove the back cover and battery as described in the battery replacement section.
• Using a small Phillips screwdriver, remove all visible screws securing the back frame.
• Carefully use a plastic opening tool to detach the clips around the frame and remove the back frame.
• Disconnect the screen's flex cable gently using a spudger to avoid any damage.
• Carefully heat the edges of the screen with a hairdryer or heat gun to loosen the adhesive.
• Use a plastic opening tool to lift the screen slightly and gently remove it from the frame.
• Place adhesive strips along the edges of the new screen.
• Align the new screen and press it firmly into place to secure it.
• Reconnect the screen's flex cable and reassemble the back frame by reversing the steps above.
• Reinsert the battery, attach the back cover, and power on the device to check if the new screen works correctly.

Replacing the Back Cover

• Power off the device.
• Remove the back cover by carefully prying it open with your fingers or a plastic tool.
• If the back cover is damaged, take a new back cover replacement.
• Place the new back cover on the device and press it down until it clicks into place securely.
• Power on the device to ensure everything is working correctly.

Following these detailed instructions will help you successfully replace parts on your Lenovo A656. Ensure that all replacements are done with care to avoid any damage to the device.